IBM L40 SX Quick Reference page 28

16
Install your operating system and application programs.
Follow the instructions that come with these manuals and
diskettes.
17
If you installed OS/2, do the following to install the Power
Management Device Driver program.
a. Insert the backup copy of the Reference Diskette into the
drive.
b. At the OS/2 prompt, type A:PMNGINST and press Enter.
c. If the installation was successfully completed, remove the
backup copy of the Reference Diskette.
d. Press Ctrl +Alt +Delete to restart the system.
18
If you use the EMS memory under DOS 4.00, install the EMS
memory manager. The instructions are provided in Appendix C.
"Installing the EMS Memory Manager" on page 95.
19
If you install the Microsoft" Windows V3.0, change the line,
device=C:\himem.sys, of CONFIG.SYS file to
device=C:\himem.sys /M:2 during the installation. After the
installation, add a line, EMMEXCLUDE=E000-EFFF, to
SYSTEM.INI file.
____________________
" Microsoft is a trademark of Microsoft Corporation.
Getting Started 16