Suspend and Resume Modes
The Model L40 SX is a battery-powered computer with unique
techniques to conserve battery power. For example, it the display is
closed while operating the computer, it automatically enters Suspend
Mode and all tasks are stopped to save power, and their present
states are stored in the computer memory. Later, when the display is
opened, the computer automatically returns to Resume Mode and
restores the same states as when it entered Suspend Mode.
Entering Suspend Mode
The computer enters Suspend Mode when one of the following
happens.
• Closing the display
Ensure Suspend Mode
1. When you close the display to successfully enter Suspend Mode
Two beeps sound when entered Suspend Mode from VM86 mode.
One beep sounds when entered Suspend Mode from any other
mode.
2. To again enter Suspend Mode immediately after Resume Mode,
close the display about 5 seconds after ensuring that you once
returned to Resume Mode by one beep. Otherwise, you cannot know
which mode the computer is in because the display has been closed
even though the computer is still in Resume Mode.
• Issuing the PS2 OFF command in the Set features program
• Setting the System power off after option to XX minutes
• Battery-low condition is detected. For more information, see
page 30.
Operating Your Computer
40