Ibm Power Cords - IBM L40 SX Quick Reference

IBM Power Cords

For your safety, IBM provides a power cord with a grounded
attachment plug to use with this IBM product. To avoid electrical
shock, always use the power cord and plug with a properly grounded
outlet.
IBM power cords used in the United States and Canada are listed by
Underwriters Laboratories (UL) and certified by the Canadian
Standards Association (CSA).
For units intended to be operated at 115 volts: Use a UL-listed and
CSA-certified cord set consisting of a minimum 18 AWG, Type SVT
or SJT, three-conductor cord, a maximum of 15 feet in length and a
parallel blade, grounding-type attachment plug rated 15 amperes,
125 volts.
For units intended to be operated at 230 volts (inside the U.S.):
Use a UL-listed and GSA-certified cord set consisting of a minimum
18 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15
feet in length and a tandem blade, grounding-type attachment plug
rated 15 amperes, 250 volts.
For units intended to be operated at 230 volts (outside the U.S.):
Use a cord set of a minimum 18 AWG, and a grounding-type
attachment plug rated 15 amperes, 250 volts. The cord set should be
marked HAR and have the appropriate safety approvals for the
country in which the equipment will be installed.
Appendix A. Additional Information 88