3Com 3CRWEASYA73 / WL-575 User Manual page 308

C 6: C L
HAPTER OMMAND INE
Example
AP (config)#link-integrity ping-interval 20
AP (config)#
link-integrity ping-fail-retry
This command configures the number of consecutive failed Ping counts before
the link is determined as lost.
Syntax
Default Setting
Command Mode
Example
AP (config)#link-integrity ping-fail-retry 10
AP (config)#
link-integrity ethernet-detect
This command enables an integrity check to determine whether or not the access
point is connected to the wired Ethernet.
Syntax
Default Setting
Command Mode
Example
AP (config)#link-integrity ethernet-detect
Notification : Ethernet Link Detect SUCCESS - RADIO(S) ENABLED
AP (config)#
I
NTERFACE
link-integrity ping-fail-retry <counts>
counts - The number of failed Ping counts before the link is determined
as lost. (Range: 1 - 10)
6
Global Configuration
[no] link-integrity ethernet-detect
Disabled
Global Configuration
6-176