3Com 3CRWEASYA73 / WL-575 User Manual page 151

Command Mode
Interface Configuration (Ethernet)
Example
AP(if-ethernet)#ip telnet-server enable
AP(if-ethernet)#
ip http port
This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
ip http port <port-number>
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1024-65535)
Default Setting
80
Command Mode
Global Configuration
Example
AP (config)#ip http port 769
AP (config)#
Related Commands
ip http server (6-19)
ip http server
This command allows this device to be monitored or configured from a browser.
Use the no form to disable this function.
Syntax
[no] ip http server
Default Setting
Enabled
6-19
Using the Command Line Interface