3Com 3CRWEASYA73 / WL-575 User Manual page 243

Example
AP (config)#address filter default denied
AP (config)#
Related Commands
address filter entry (6-111)
802.1x-supplicant user (6-108)
address filter entry
This command enters a MAC address in the filter table.
Syntax
address filter entry <mac-address> <allowed | denied>
• mac-address - Physical address of client. (Enter six pairs of hexadecimal
digits separated by hyphens; e.g., 00-90-D1-12-AB-89.)
• allowed - Entry is allowed access.
• denied - Entry is denied access.
Default
None
Command Mode
Global Configuration
Command Mode
• The access point supports up to 1024 MAC addresses.
• An entry in the address table may be allowed or denied access depending
on the global setting configured for the address entry default
command.
Example
AP (config)#address filter entry 00-70-50-cc-99-1a allowed
AP (config)#
Related Commands
address filter default (6-110)
802.1x-supplicant user (6-108)
6-111
Using the Command Line Interface