3Com 3CRWEASYA73 / WL-575 User Manual page 163

autoupgrade directory
This command specifies the directory in which to search for firmware updates on
the local PC designated to be an auto-upgrade server.
NOTE: Firmware files used with this feature must be in the following format;
A73_xx_yy_zz_sh.img (shipping version), or A73_xx_yy_zz_ww.img (world wide version).
Syntax
autoupgrade directory <drive>
• drive - Specifies a drive or folder on which to look for firmware upgrades.
Default Setting
none
Command Mode
Global Configuration
Example
This example specifes the "d" drive to perform an auto-upgrade search in.
AP (config)#autoupgrade directory d:
AP (config)#
autoupgrade IP
This command specifies the servers on which to search for firmware upgrades.
NOTE: Due to memory limitations access points cannot function as auto-upgrade
servers. Only local drives on PCs may serve this function.
Syntax
autoupgrade IP <[ 1 | 2 | 3 | 4] IP_address>
• 1~4 - The server on which to search for updates, up to a maximum of 4.
- IP_address - Specifies the IP address of the auto-upgrade server in the
form xx.xx.xx.xx. Using 0.0.0.0 disables communication.
6-31
Using the Command Line Interface