3Com 3CRWEASYA73 / WL-575 User Manual page 240

C 6: C L
HAPTER OMMAND INE
Example
AP (config)#802.1x session-timeout 300
AP (config)#
802.1x-supplicant enable
This command enables the access point to operate as an 802.1X supplicant for
authentication. Use the no form to disable 802.1X authentication of the access
point.
Syntax
Default
Command Mode
Command Usage
Example
AP(config)#802.1x-supplicant enable
AP(config)#
802.1x-supplicant user
This command sets the user name and password used for authentication of the
access point when operating as a 802.1X supplicant. Use the no form to clear the
supplicant user name and password.
Syntax
Default
I
NTERFACE
802.1x-supplicant enable
no 802.1x-supplicant
Disabled
Global Configuration
A user name and password must be configured first before the 802.1X
supplicant feature can be enabled.
802.1x-supplicant user <username> <password>
no 802.1x-supplicant user
• username - The access point name used for authentication to the network.
(Range: 1-32 alphanumeric characters)
• password - The MD5 password used for access point authentication.
(Range: 1-32 alphanumeric characters)
None
6-108