C
6: C
L
HAPTER
OMMAND
INE
Default Setting
Command Mode
Example
This example schedules a search for configuration file updates at each boot up
and periodically.
AP (config)#autoupgrade client-status startup+periodic
AP (config)#
autoupgrade interval
This command specifies the frequency with which the unit will search for
firmware upgrades when the command "autoupgrade client-status
startup+periodic" is used.
Syntax
Default Setting
Command Mode
Example
This example schedules periodic upgrades every 72 hours.
AP (config)#autoupgrade interval 72
AP (config)#
I
NTERFACE
• startup+periodic - Schedules a search each time the unit boots up and
periodically. The periodic parameter may be configured using the
autoconfig interval command.
Disabled
Global Configuration
autoupgrade interval <hours>
hours - The period of time after which the unit will search for firmware
upgrades. (Length: 1-8760 hours)
24 hours
Global Configuration
6-30