3Com 3CRWEASYA73 / WL-575 User Manual page 296

C 6: C L
HAPTER OMMAND INE
Command
cipher-suite
mic_mode
wpa-pre-shared- key
pmksa-lifetime
pre-authentication
auth
This command configures authentication for the VAP interface.
Syntax
Default Setting
Command Mode
I
NTERFACE
Function
Selects an encryption method for the global key used
for multicast and broadcast traffic
Specifies how to calculate the Message Integrity
Check (MIC)
Defines a WPA preshared-key value
Sets the lifetime PMK security associations
Enables WPA2 pre-authentication for fast roaming
auth <open-system | shared-key | wpa | wpa-psk | wpa2 | wpa2-psk |
wpa-wpa2-mixed | wpa-wpa2-psk-mixed | > <required | supported>
• open-system - Accepts the client without verifying its identity using a
shared key. "Open" authentication means either there is no encryption (if
encryption is disabled) or WEP-only encryption is used (if encryption is
enabled).
• shared-key - Authentication is based on a shared key that has been
distributed to all stations.
• wpa - Clients using WPA are accepted for authentication.
• wpa-psk - Clients using WPA with a Pre-shared Key are accepted for
authentication.
• wpa2 - Clients using WPA2 are accepted for authentication.
• wpa2-psk - Clients using WPA2 with a Pre-shared Key are accepted for
authentication.
• wpa-wpa2-mixed - Clients using WPA or WPA2 are accepted for
authentication.
• wpa-wpa2-psk-mixed - Clients using WPA or WPA2 with a Pre-shared
Key are accepted for authentication
• required - Clients are required to use WPA or WPA2.
• supported - Clients may use WPA or WPA2, if supported.
open-system
Interface Configuration (Wireless-VAP)
6-164
Mode Page
IC-W-VAP 6-169
IC-W 6-170
IC-W-VAP 6-171
IC-W-VAP 6-172
IC-W-VAP 6-173