3Com 3CRWEASYA73 / WL-575 User Manual page 130

C 5: S C
HAPTER YSTEM ONFIGURATION
RSSI
The RSSI Monitor window performs a realtime scan that shows the RSSI values of
neighboring APs detected by the unit. The scan is performed when the RSSI
Monitor tab is selected in the Status menu.
NOTE: Initiating an RSSI scan will impact network connectivity for the duration of
the scan and will halt your access to the management interface until it completes.
Figure 56 RSSI Monitor
The RSSI Monitor table displays the following information:
SSID – The service set identifyer for the detected AP.
Encryption – Displays if encryption is being used or not.
RSSI Indicator – Indicates the strength of the signal detected from the
neighboring device in a color representative graph. If a signal with an RSSI value
less than 20 displays the color graph illuminates red. Over 20 illuminates yellow.
RSSI Value (%) – The RSSI figure for the detected device in percentage.
Operation Mode – Indicates what radio mode the detected device is using.
Channel – Indicates the channel number that the detected devise is using.
5-82