NEC DSX 1093099 Feature Handbook page 46

Conference
To exit a Conference without affecting the other parties:
Hang up.
1.
• The remaining parties can continue their conversation uninterrupted.
• If you were in Conference with two outside lines, this may set up a tandem call. Refer to Tandem Calls /
Unsupervised Conference (page 157) for more.
Using Conference at a Single Line Telephone
To use Conference at a single line telephone:
Establish an Intercom or outside call.
1.
Hookflash and dial the extension or outside line you want to add.
2.
Hookflash and dial #10 to set up the Conference.
3.
• If you cannot add additional parties to your Conference, you have exceeded the system's Conference limit.
Repeat steps 2 and 3 to add additional parties to your Conference.
4.
38 ◆ Features
Exiting a Conference
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
DSX Feature Handbook