NEC DSX 1093099 Feature Handbook page 159

Programming and Dialing Personal Speed Dial
Press
b. SPEAKER
To dial a stored Personal Speed Dial number:
Do one of the following.
1.
a. Press INTERCOM,
24-Button or 34-Button Telephone Only
b.
Press bin key for bins 701-710.
c. Press a Feature Key set up as a Personal Speed Dial key.
Super Display Telephone Only
d. • Press
• Press the soft key for the number you want to dial.
• To chain bins, wait for the first bin to dial out, then press a bin key or Feature Key.
2. • If the programmed route is busy, press an idle line key to reroute the call.
(Optional)
• You cannot chain Intercom numbers.
Programming and Dialing System Speed Dial
Forced Account Codes may prevent Speed Dial from dialing 911 emergency services.
To program a System Speed Dial number:
1. Do not lift the handset or press any keys.
2. Dial (#77).
#SP
3. Dial the System Speed Dial bin number (normally 201-299).
Press .
4. HOLD
5. Do one of the following.
Enter the line number you want the system to use when dialing your stored number (1-64).
a.
b. Enter the Line Group number you want the system to use when dialing your stored number (90-98).
Press
c. INTERCOM
Press HOLD .
6.
Enter the number you want to store (up to 32 digits long).
7.
• If storing Intercom codes, you can enter a valid dial sequence using the digits 0-9, #, and *.
• To insert a pause, press
• Do not enter a pause or flash into an Intercom code.
8. Press HOLD twice.
Enter a name for the Speed Dial number.
9.
• See Name Programming Chart (page 153) for more.
10. Press HOLD .
Do one of the following.
11.
DSX Feature Handbook
to exit.
dial # , then dial the Personal Speed Dial bin number (701-720).
(bins 701-710) or
Spd Dial 1 Spd Dial 2
if you want to enter Intercom codes.
. To insert a Flash, press
MUTE
(bins 711-720).
.
FLASH
Speed Dial
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 151