NEC DSX 1093099 Feature Handbook page 75

Operation
Sending a Call to a Terminal or Circular Hunting Group
To send a call to a Terminal or Circular Hunting Group:
1. Do one of the following.
Transfer an outside call to a hunt group member.
a.
b. Set up a DIL to a hunt group member.
c. Place a ringing Intercom call to a hunt group member.
d. Set up a hunt group member as a line's overflow destination.
To send a call to a UCD Group:
Do one of the following.
1.
a. Transfer a call to the UCD Group master number.
Set up a DIL to the UCD Group master number.
b.
c. Place an Intercom call to the UCD Group master number.
d. Set up the UCD Group master number as a line's overflow destination.
Removing/Reinstalling your Extension from your UCD Group
To temporarily remove/reinstall your extension from your UCD Group:
1. Press INTERCOM and dial
Do one of the following:
2.
a. Dial 4
b. Dial 6
3. Press SPEAKER to hang up.
DSX Feature Handbook
Sending a Call to a UCD Group
*5 .
to return your extension to your UCD Group.
to remove your extension from your UCD Group.
Extension Hunting
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 67