Non-Kit Standard Installation - Tripp Lite B130-101A-MR Owner's Manual

Installation

Non-Kit Standard Installation

Note:
1. If desired, perform the EDID copy procedure described in this manual prior to
2. The diagram above shows a B132-004A-2 VGA + Audio Extender/Splitter
3. Test to make sure the entire installation works properly before pulling cables
4. To achieve maximum distance and performance, 24 AWG solid-wire Cat5e/6
5. To achieve maximum resolution, it is recommended that you use Tripp Lite
15-04-118-9333BE.indd 11
continued
Source PC
installation.
installation. Installation will be the same for the B132-002A-2 model, except the
B132-002A-2 contains fewer output ports and no local ports.
through ceilings/walls.
cable must be used. The use of stranded wire Cat5e/6 cable, or cable with a
gauge (AWG) size higher than 24 AWG will result in shorter extension distance.
All Tripp Lite N202-Series cables are made with 24 AWG solid-wire cabling.
Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24 AWG solid-wire
bulk cables. For optimal image quality, use Zero-Skew cable such as Tripp Lite
P524-01K.
P502-Series VGA video or P504-Series VGA video and audio cables with
RGB coax.
B132-100A-MR
B132-004A-2
11
4/8/2015 10:35:10 AM