Table of Contents
Advertisement
2. When the window shown in Figure 11 appears, click on the COM port you wish to use. The default setting
is COM 1.
3. Click on the "OK" button to activate your selection or click on "Cancel" and make a new selection.
Connecting the Software
To connect the program for any reason after it has been opened, proceed as follows:
1. Click on the "Setup" heading on the main menu bar and hold down the mouse button.
2. Select "Connect" from the pull down menu, as shown in Figure 12, and release the mouse button.
Disconnecting the Software
To disconnect the software for any reason (before changing the COM port setting, for example), proceed as
follows:
1. Click on the "Setup" heading on the main menu bar and hold down the mouse button.
2. Select "Disconnect" from the pull down menu, as shown in Figure 13, and release the mouse button.
COM PORT SELECTION WINDOW
FIGURE 11
ACTIVATING THE SOFTWARE CONNECT FUNCTION
FIGURE 12
DEACTIVATING THE SOFTWARE CONNECT FUNCTION
FIGURE 13
– 8 –
ENGLISH
Advertisement
Table of Contents
