Using The Ua888 System; Getting Started; Changing The Com Port Setting - Shure ua888 User Manual

USING THE UA888 SYSTEM

Getting Started

To activate the UA888 system, proceed as follows:
1. Turn on the computer, the UA888 Interface Module, and the U4 Receivers.
2. Go to the main menu on the computer display and double click on the UA888 icon, shown in Figure 8.
If the system is linked to the computer via COM Port 1, it will automatically establish a software connection
and detect any connected receivers. Icons of the receiver displays will appear on the right side of the main
monitor window, as shown in Figure 9.

Changing the COM Port Setting

If COM Port 1 is not available, you must select another communications port before a successful software
connection can be made. To change the COM port setting, proceed as follows:
1. Click on the "Setup" heading and select "COM port" from the pull down menu, as shown in Figure 10.
ENGLISH
UA888 PROGRAM ICON
FIGURE 8
MAIN UA888 MONITOR DISPLAY
FIGURE 9
SELECTING COM PORT FROM THE SETUP MENU
FIGURE 10
– 7 –