3. When the window shown in Figure 23 appears, click on the arrow next to the "Drives" field and scroll to
the disk drive that contains the desired file.
4. Select the desired scene from the "File Open" field.
5. Click on the "OK" button to execute the "retrieve" function. The scene window will automatcially appear.
Deleting Scene Files
Scenes files can only be deleted from outside the UA888 program, using the Windows file manager. To delete
a scene file, proceed as follows:
1. Exit the UA888 program by clicking on the "File" heading on the main menu bar and selecting "Exit."
2. Open the file manager window and scroll to the drive containing the UA888 directory.
3. Open the UA888 directory and scroll to the .SCN file you wish to delete.
4. Highlight the targeted file and click on the DELETE button.
Using the "Walk Around" Plotter
The Walk Around Plotter measures transmitter signal strength in real time so you can measure signal strength
and map "dead" spots in the performing area. It also tracks transmitter performance via the corresponding
receiver antennas. To perform a Walk Around test, proceed as follows:
1. Click on the "Walk Around" heading in the main menu bar and highlight "Start," as shown in Figure 24.
Then release the mouse button.
2. When the window shown in Figure 25 appears, click on the arrow next to the "Select Receiver" field and
scroll to receiver you wish to test.
ENGLISH
SELECTING A STORED SCENE
FIGURE 23
SELECTING THE "WALK AROUND" PLOTTER FUNCTION
FIGURE 24
– 13 –