Shure MVi User Manual
  1. Manuals
  2. Brands
  3. Shure Manuals
  4. Accessories
  5. MVI
  6. User manual

Shure MVi User Manual

Digital audio interface
Hide thumbs Also See for MVi:
Table of Contents

Advertisement

Quick Links

Download this manual
MVi
MVi -- Digital Audio Interface
The Shure compact digital audio interface, MVi, user guide.
Version: 2 (2019-C)

Advertisement

Table of Contents
loading

Related Manuals for Shure MVi

Summary of Contents for Shure MVi

  • Page 1 MVi -- Digital Audio Interface The Shure compact digital audio interface, MVi, user guide. Version: 2 (2019-C)

  • Page 2: Quick Setup

    Digital Audio Interface General Description The Shure MVi is a compact digital audio interface used to connect a microphone, guitar, or other instrument to a ® computer or mobile device. Audio and power are delivered through a single USB or Lightning connection to provide a simple and portable recording solution.
  • Page 3 Shure Incorporated Open the Shure MVi driver from the sound control panel and raise the headphone volume from the playback or output tab. Plug a microphone or instrument into the input on the rear panel. The XLR/TRS combo input is compatible with microphones, guitars, instruments, and other line-level sources.

  • Page 4: Rear Panel

    1/4" Instrument Input Monitoring The MVi features a combination XLR and 1/4" TRS input. When a 1/4" input is inserted to an MVi, input mode switches to Hi-Z (instrument) and only flat mode is available. The flat preset mode enables the input monitor to be turned on or off.

  • Page 5: Accessing The Control Panel

    Adjusting Headphone Level The headphone monitoring level is affected by the MVi device level and the computer settings level. Raise your computer volume up and easily adjust headphones through the MVi touch panel headphone control.
  • Page 6 Shure Incorporated Mac audio settings panel Input Meter Level If your digital audio workstation or recording software has input meters, adjust the microphone level so it peaks between -12 and -6 dB. Otherwise, simply listen to the audio to make sure it is loud enough and not distorting.

  • Page 7: Troubleshooting

    Check the computer sound control panel settings. When first connecting the MVi to your computer, make sure to raise the computer volume level. Audio sounds bad Check the sound control panel of the computer to ensure that the MVi is fully plugged in and recognized. Audio is distorted Use the audio meter to ensure that volume peaks are within the target range.

  • Page 8: Specifications

    Shure Incorporated • iOS 10.0 and higher iPhone • iPhone 5 and higher iPod Touch • 5th gen iPad • iPad 4th gen and higher iPad Mini • iPad Mini 1st gen and higher Specifications MFi Certified DSP Modes (Presets)

  • Page 9: Furnished Accessories

    Shure Incorporated Maximum Input Level 3-pin XLR 0 dBV 6.35 mm (1/4") TRS +9 dBV Headphone Output 3.5 mm (1/8") Power Requirements Powered through USB or Lightning connector Phantom Power +48V USB/+12V iOS Mute Switch Attenuation Housing all metal construction Net Weight 310.0 g (10.93oz.)

  • Page 10: Information To The User

    (screened) cable types may degrade EMC performance. This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East &...
  • Page 11 Shure Incorporated "Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Table of Contents