Specifications - Shure ua888 User Manual

SPECIFICATIONS

Operating Voltage
+5 Vdc supplied by Shure U4 receiver.
Operating Current
UA888: 45 mA
Temperature Range
Operating: -7_ to 49_ C (20_ to 120_ F)
Storage: –29_ to 74_ C (–20_ to 165_ F)
Dimensions
44 mm H x 482 mm W x 295 mm D
3 5
(1 / in x 19 in x 11
4
Weight
930 g (6.5 lbs)
Furnished Accessories
25 DB Cable . . . . . . . . . . . . . . . . . .
5-pin DIN Shure Link Cable
3.5" Floppy Diskette
Certification
FCC Verified under Part 15 as a Class B digital
device. Conforms to European Union directives,
eligible to bear CE marking; meets European
Union EMC Immunity Requirements (ETS 300
445).
ENGLISH
/ in)
8
Part No.
95A8745
. . . . . . . . 95A8676
. . . . . . . . . . . . . 84A0019A
Information to User
Changes or modifications not expressly ap-
proved by Shure Brothers Inc. could void your
authority to operate this equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These lim-
its are designed to provide reasonable protec-
tion against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the in-
structions, may cause harmful interference to ra-
dio communications. However, there is no guar-
antee that interference will not occur in a particu-
lar installation. If this equipment does cause
harmful interference to radio or television recep-
tion, which can be determined by turning the
equipment off and on, try to correcting it through
one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Consult your dealer or an experienced
radio/TV technician for help.
NOTE: Do not use cables longer than 3.1 m (10
ft.) to connect the UA888 Interface Module to a
U4 receiver.
Under extremely abnormal conditions, electri-
cal transients on the power line may interrupt
communication between the UA888 Interface
Module and the computer. The UA888 will not
be damaged; normal operation will resume
when the CONNECT command is executed.
– 19 –