Table of Contents
Advertisement
ELAN HOME SYSTEMS
Planning
The VL10 can be installed and placed on almost any flat surface such as
a desk, table or countertop, or easily mounted underneath a cabinet.
Because it folds flat, the VL10 can be tucked neatly out of view when not
in use.
When planning specific under cabinet installation locations for LCD
Touch Panels, please keep the following tips in mind:
• When properly installed, nothing should be applying contact pressure to
the touch panel except for the operator's finger. If something is touching
the touch screen window, a false signal can be generated causing the touch
panel to respond incorrectly.
• Avoid installation in direct sunlight or strong ultraviolet light (such as grow
lamps for plants). This can degrade or discolor the polyester film.
• Avoid installation over heat generating devices and/or in moist areas where
condensation can form on the polyester film. Both heat and condensed
moisture can affect touch screen performance.
• The touch panel/LCD assembly should not be mounted near electronics
that emit radio frequencies or electromagnetic interference (such as CRT
monitors, light dimmers, and some power supplies).
• Do not mount the VL10 outdoors or in areas exceeding its operating
temperature range of -10°F (-23°C) to +115°F (+46°C). If the LCD display is
over-heated or its temperature reduced below its recommended minimum,
the liquid crystal polymer can be damaged and the display image may not
recover.
© ELAN Home Systems 2011 • All rights reserved.
Page 7
VL10
Advertisement
Table of Contents
