Table of Contents
Advertisement
VL10
ELAN HOME SYSTEMS
Power Supply Options
The VL10 Precision Panel allows for power to be supplied from a remote
or a local source. If you choose to power the VL10 locally you will need
to purchase a PWR1.
Cable Strain Relief
The VL10 has a cable clamp system on the underside of the base cover,
along the rear edge. After the cables have been connected, loosen the
clamp screw and place the Ethernet and power cables into the cutouts.
Tighten the clamp screw to hold the cables in place. Do not over
tighten.
© ELAN Home Systems 2011 • All rights reserved.
Page 10
Advertisement
Table of Contents
