How To Charge 28 It - Siemens eCharger User Manual

How to charge
How to charge
LED legend
The LEDs indicate the eCharger status.
① Power LED (green) indicates connection to the power
supply.
② Status LEDs (multicolor) indicates
current charging and drying state of
the left/right hearing instrument.
Preparation
Connect the eCharger to a power supply.

The power LED stays on continuously.
Charging and drying
The hearing instruments are first charged and then dried.
Press the front button to open the eCharger and unlock

the lid.
Place your hearing instruments into the charging slots

(refer to the picture).
Please note that the correct function of the
eCharger is only ensured if the ear pieces are
placed as shown in the picture.
Turn the ear pieces inwards.

Do not cross the ear pieces.

28