Connecting A Camera Control Unit (Ccu) - Sony CA-TX70 Operating Instructions Manual

Connecting a Camera
Control Unit (CCU)
When operating the camera in a system
with a CCU, connect between the CCU
connector of the adaptor and the
CAMERA connector of the CCU.
When required, secure the cable to the
adaptor, using the supplied cable clamp
belt.
To use the cable clamp belt
1
Insert the belt bracket C into hole
A or B of the cable clamp belt.
2
Secure the belt to the Cable clamp
attachment using the two supplied
screws (+B3×8).
3
1 Release the buckle, 2 bundle
the cable with the belt, 3 then lock
the buckle again.
1
3
4
Adjust the length by pulling down
the end of the belt.
Preparation and Setting
2
11