Table of Contents
Advertisement
Connecting the CCU-790/790P to the Video Camera
When connecting a CCU-790/790P to a BVP-E10/E10P/
E10WS/E10WSP/E30/E30P/E30WS/E30WSP Color
Video Camera, you must first attach the CA-570/570P/
590/590P Camera Adaptor to the video camera.
CCU-790/790P
Notes on connections
Triax cable
The triax cable should never be connected to or
disconnected from the CCU-790/790P when the power is
turned on. Always turn the unit off first.
Video camera
Some switches or controls on the video camera may not
work when the camera is connected to the CCU-790/790P.
10
Connecting the CCU-790/790P to the Video Camera
Triax cable
To an AC power source
A large lens and the BVF-77/77CE 7-inch Viewfinder are
connected to the CCU-790/790P through the CA-905K/F/
T series large-lens adaptor and the BKP-9057 Viewfinder
Saddle, as shown in the illustration below.
CA-570/570P/590/590P
BVP-E10/E10P/E10WS/E10WSP/
E30/E30P/E30WS/E30WSP
When a large lens is used
BVF-77/77CE
BKP-9057
CA-905K/F/T
Note
The maximum power output from the CAMERA connector of the
CCU-790/790P is 360 VA (including a cable loss). Do not
connect any equipment which consumes more than 360 VA of
power.
For details, refer to Operation Manuals of the video
camera and the camera adaptor.
CA-570/570P/590/590P
BVP-E10/E10P/E10WS/E10WSP/
E30/E30P/E30WS/E30WSP
Advertisement
Table of Contents
