Table of Contents
Advertisement
Rear
a Cable clamp attachment
Attaches the supplied cable clamp belt.
b TALLY lamp (red)/(green)
When the TALLY switch is set to ON,
the TALLY lamp lights to indicate that a
tally signal is input to the connected
camera control unit or a call signal is
generated by pressing the CALL button.
When the TALLY switch is set to OFF,
the lamp does not light.
c TALLY switch
Set to ON when you use the TALLY
lamp.
d RET button / RET 2/3/4 switch
When using return video 1 and other
line simultaneously, the return video
signal selected with the RET 2/3/4
switch is displayed on the viewfinder
screen while the RET button is pressed.
6
Names and Functions of Parts
qk Camera/
Camcorder screws
ql Camera/Camcorder
connector
w; V shoe
wa CCU connector
ws Camera/
Camcorder power
supply connector
wd Screw hole for
camera/camcorder
e RET 1 button
The return video 1 signal from the
camera control unit is monitored on the
viewfinder screen while this button is
pressed.
Notes
• If you press both the RET 1 button
and RET button (RET 2/3/4), the RET
1 button takes priority.
• When the adaptor is connected to the
PMW-500/350/320 Solid-State
Memory Camcorder, if you change
the return video signal, the previously
selected return signal may be
displayed for a moment in the
viewfinder.
• When the adaptor is connected to the
PMW-500/350/320 Solid-State
Memory Camcorder, if you press the
RET button to switch the displayed
picture, the picture in the viewfinder
may be distorted for a moment. This
is not a malfunction.
f CALL button
When this button is pressed, the red
CALL lamp on the front panel of a CCU
or external controlling device (RCP/RM,
etc.) will light.
Advertisement
Table of Contents
