Using The [Wi-Fi Setup Wizard] To Set Up A Connection - Panasonic HC-V770 Operating Instructions Manual

Using the [Wi-Fi Setup Wizard] to set up a connection

With the smartphone application "Image App", you can transfer the following information between
the smartphone and this unit by using the NFC or QR code function.
≥ Set [Direct Connection Password] in [Wi-Fi Setup] to [ON].
(The default setting is [OFF].)
Set on the smartphone and
transfer to this unit
Transfer from this unit to the
smartphone
* Acquire a Login ID and Password for the "LUMIX CLUB" on this unit in advance.
≥ Install the smartphone application "Image App" on your smartphone.
If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to ON.
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Wi-Fi Setup Wizard].
3
Touch [YES].
4
Start up the smartphone application "Image App".
5
Touch the smartphone on
≥ Touch the NFC touch area while the NFC mark is displayed on the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit, touch [YES] on the screen of this
unit, and then touch the smartphone on
≥ When the connection is complete, the setup screen is displayed on the smartphone.
6
Follow the on-screen instructions of the smartphone to set up a connection.
≥ When the settings is complete, the smartphone and this unit are connected directly, allowing you
to use remote operations.
≥ Clock information
≥ Information on wireless access points (SSIDs and Passwords)
≥ "LUMIX CLUB" Login ID, Password
≥ Device ID for home monitoring
of this unit.
of this unit again.
(l 154)
- 183 -
(l 194)
*
(l 181)