Table of Contents
Advertisement
Menu Item
Plug and Play
Aware O/S
Primary Graphics
Adapter
PCI VGA Palette
Snoop
PCI IDE Bus
Master
Menu Item
Onboard Sound
Chip
Onboard FDC
Onboard Serial
Port A
Onboard Serial
Port B
IR I/O Pin Location
Select
Serial Port B Mode
IR Duplex Mode
IrDa Protocol
Onboard Parallel
Port
Parallel Port Mode
EPP Version
2-16 System Configuration
Advanced Menu - PCI/Plug and Play Setup
Settings (default is bold)
No for Win NT, Yes for Win 9x
Select Yes if the system's operating system is Plug and Play compliant.
PCI, AGP
Select AGP if the graphics board is AGP. Select PCI if the graphics
board is PCI.
Disabled, Enabled
Set to Enabled if an ISA adapter board requires VGA palette snooping.
Disabled, Enabled
Set to Enabled to specify that the IDE controller on the PCI local bus
includes a bus mastering device.
Advanced Menu - Peripheral Setup
Settings (default is bold)
Disabled, Enabled
The Enabled setting allows use of onboard sound.
Auto, Disabled, Enabled
Select Auto to automatically detect FDC devices.
Auto, Disabled, 3F8h, 2F8h, 3E8h, eE8h
Auto, Disabled, 3F8h, 2F8h, 3E8h, eE8h
SINB/SOUTB, IRRX/IRTX
Normal, IrDA, ASK IR
Selecting Normal sets the port for normal use, not for IR use.
N/A
N/A
Auto, Disabled, 378, 3BC
Select Auto to allow the BIOS to automatically assign the parallel port to
an available parallel port IRQ.
Normal, Bi-Dir, EPP, ECP
Use this mode to choose the operating mode of the onboard parallel
port.
Use this setting (1.7 or 1.9) to select the EPP version.
Hide quick links:
Advertisement
Table of Contents
