Advanced Menu - Plug And Play Setup - NEC POWERMATE ES Series Service And Reference Manual

Advanced Menu - Power Management Setup
Menu Item Settings (default is bold)
15, Every Date
RTC Alarm Date
Sets the day that the system boots up (when Resume on RTC Alarm
is Enabled).
12, 1-00
RTC Alarm Hour
Sets real time clock alarm hour (when Resume on RTC Alarm is
Enabled).
RTC Alarm Minute 30, 0-59
Sets real time clock alarm minute (when Resume on RTC Alarm is
Enabled).
30, 0-59
RTC Alarm Second
Sets real time clock alarm minute (when Resume on RTC Alarm is
Enabled).

Advanced Menu - Plug and Play Setup

Menu Item Settings (default is bold)
Plug and Play No, Yes
Aware O/S
Select No to allow the BIOS to initialize any add-on boards (Windows
NT only). Select Yes to allow the operating system to initialize any
add-on boards (Windows 98 and Windows 2000).
Clear NVRam No, Yes
Select No to prohibit clearing of NV Ram.
Primary Graphics Add-on VGA, Onboard VGA
Adapter
Select Onboard VGA if VGA is integrated on the system board.
Disabled, Enabled
PCI VGA Palette
Snoop
Set to Enabled to enable PCI VGA palette snooping.
DMA Channel PnP, ISA
0, 1, 3, 5, 6, 7
Permits configuring the DMA channels either by Plug and Play or by
ISA.
IRQ 3, 4, 5, ,7, 9, PCI/PnP, ISA
10, 11, 14, 15
Permits configuring the interrupt requests either by PCI/Plug and Play
or by ISA.
Disabled, Enabled
Reserved Memory
Size
Select Enabled to reserve a non-writeable zone in memory.
Reserved Memory D0000
Address
Defines the non-writeable zone in memory.
System Configuration 2-15