NEC PowerMate VT 300i Series Service And Reference Manual page 125

NEC CSD recommends that you download files from the
Bulletin Board Service to a diskette and not to your hard
drive.
Log onto the BBS as follows.
1. From the Windows desktop, click
2. Point to
Programs
3. Double click the
Hypertrm.exe
4. Follow the instructions on the screen to set up your modem. Click the
HyperTerminal help button for information about dialing the phone number.
If you need to check communications settings, check that the settings match
the following BBS parameters.
T
: select any baud rate that matches your modem
Baud rate
T
: none
Parity
T
Data bits : 8
T
Stop bits : 1
T
: Xon/Xoff (select Hardware if using 14.4 Kbps or higher).
Flow control
5. Following the HyperTerminal instructions, enter the BBS phone number
( 916-379-4499 ). Your business phone system and/or location might require
a 9 1 or 1 prefix.
:
Note
The first time that you use the BBS, you are
requested to provide information for a new user
questionnaire.
6. Press
Enter twice.
7. Enter your first name, last name, and password. Press
8. Follow the screen prompts until the Main Menu is displayed.
9. At the Main Menu, select
the desktop conference.
10. From the Main Menu, press
11. At the File menu, select
! CAUTION
Start .
. Point to Accessories
icon. The HyperTerminal program appears.
J to join a conference. Select
F and Enter
F for a list of downloadable files.
NEC CSD Information Services 8-5
and then click HyperTerminal
Enter after each.
Conference 1
for the File menu.
.
for