Test Wls909 And Wls919 Reception - DSC LCD55O1Z32-433 Installation Manual

T E S T I N G & M O U N T I N G
5.2 Test WLS909 & WLS919 Reception
The wireless key (WLS909) cannot be tested using the module placement test described
above. To ensure that the LCD5501Z32-433 is receiving transmissions from these
devices, conduct the following tests:
WLS909/WLS919: Use the function keys to arm and disarm the system at several
different points in the installation.
If these devices do not operate from all points in the installation, you will need to move
the LCD5501Z32-433 receiver. Moving the LCD5501Z32-433 higher will usually
improve the reception.
If you move the LCD5501Z32-433, repeat the tests described in sections 5.1 and
5.2 on all the wireless devices. Continue to test the devices until you have found
satisfactory locations for the LCD5501Z32-433 and the WLS904P, WLS906 and
WLS907 devices, and there is good reception between the LCD5501Z32-433 and
the WLS909 device.
Mount the WLS904P, WLS906, WLS907, WLS912, WLS914
and WLS925L
If you have conducted the placement test described in section 5.1 and got 3 "Good"
or "Fair" results in a row for each device, you can mount the wireless devices. See the
Installation Sheet for each device for mounting instructions.
16