Alarm Test - DSC PC1500 Instruction Manual

Hide thumbs Also See for PC1500:
Table of Contents

Advertisement

Alarm Test

Enter [ ][6][Master Code][8] for a 2-second test of the keypad lights, keypad
buzzer, battery and the bell/siren.
Press [#] to return to Ready.
Programming Security Codes
The Master Code
Enter [ ][5][current Master Code][1][new Master Code]
Press [#] to return to ready
Record your new Master Code on the System Information page in this booklet.
Additional Codes
Up to 5 additional access codes (2 through 6) may be programmed. The
6th access code may be established by your installer as a One-Time use
code.
To program a new code:
Enter [ ][5][Master Code][code number 1 to 6][new 4 digit code]
The [code number] is a single digit either 2, 3, 4, 5 or 6.
Press [#] to return to Ready.
If an access code already exists, it will be replaced by the new code.
Record your new code(s) on the System Information page in this book.
To remove a code:
Enter [ ][5][Master Code][code number][
The [code number] is a single digit either 2, 3, 4, 5 or 6.
Press [#] to return to Ready.
Do not erase the Master Code (code number 1).
NOTE:
It is recommended that the factory default Master Code [1234] not be
used.
One-Time Use Code
The one-time code is designed for entry and exit of the premises for one
occasion only. The panel must be programmed by the installer for this option to
be enabled. The 6th access code is the one-time code.
To use this code, enter your one-time code as the 6th access code using the
previously described commands. When you leave the premises, arm your
system with any access code except the newly entered one-time use code. This
one-time code is given to a person (e.g. a maid) who will enter the premises
while the system is armed and you are away.
The one-time code user enters the premises and disarms the system using the
one-time access code. Upon leaving, the same code is used to arm the system.
As soon as the system is armed, the one-time code is erased and can not be
used to re-enter the premises. A different code can be provided each time for
the one-time user.
]
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc1550Pc1550 - rev8Pc1500 - rev8

Table of Contents