Operation Of Controls And Gauges; Water Temperature Gauge; Hour Meter; Fuel Gauge - Alto 3366XP Operator's Manual & Parts List

Hide thumbs Also See for 3366XP:

Troubleshooting manual (25 pages)

Table Of Contents

Table of Contents

GLOW PLUG (DIESEL)

LIGHT SWITCH

WORK LIGHT

SWITCH (OPTION)

MAIN BROOM LIFT

LEFT SIDE BROOM

LIFT (OPTION)

CHECK ENGINE LIGHT (GAS/LP)

THROTTLE CONTROL

HOPPER ROTATE

HOPPER LIFT

P4586ecp

WATER TEMPERATURE GAUGE (See Figure 2)

The water temperature gauge is located on the instrument panel to the left of the fuel gauge. The gauge is

activated by a sender in the engine. It displays the engine water temperature in °F.

HOUR METER (See Figure 2)

This meter is located to the left of the oil pressure gauge on the instrument console. This meter is activated

when the engine begins running. The meter indicates actual "run" time of the machine. The meter can be used

to indicate when maintenance should be done to the machine.

FUEL GAUGE (See Figure 2)

The fuel gauge is located between the water temperature gauge and the volt meter on the instrument panel,

and indicates the level of fuel contained in the fuel tank.

OIL PRESSURE GAUGE (See Figure 2)

The oil pressure gauge is located on the instrument panel to the right of the hour meter. The gauge is

mechanical and activated by a sender in the engine. It displays the engine oil pressure in PSI.

VOLT METER (See Figure 2)

The volt meter is located on the control panel to the left of the fuel gauge. The meter indicates the charging

or discharging of the battery. When the key is in the accessory position the gauge will register approx. 12

volts. The meter will indicate approx. 13 to 14.5 volts when the engine is running. This indicates that the

alternator is working correctly.

American-Lincoln

3366XP

HORN

(OPTION)

GAS/LP

DIESEL

& DUMP

CIRCUIT BREAKERS

PARKING BRAKE