Maintenance & Cleaning - Lang DO75 Installation, Operation And Maintenance Instructions

Electric air door pizza oven
Table of Contents

Advertisement

KEEP WATER AND SOLUTIONS OUT OF CONTROLS. NEVER SPRAY
WARNING
OR HOSE CONTROL CONSOLE, ELECTRICAL CONNECTIONS, ETC.
CAUTION
DAILY CLEANING
Remove, empty and clean the two section crumb tray located near
the front bottom of the oven. Clean the area under the crumb tray
with a vacuum cleaner. The 3/16-inch wide slots located along the
front edge of the crumb tray are the orifices for the Air-Curtain;
therefore the orifices must be free of obstructions. The crumb trays
must be installed in the oven when in use.
The oven should be thoroughly cleaned once a day to insure against
accumulation of foreign material.
Always start with a cold oven.
The stainless exterior can easily be cleaned using Lang Mfg.
Prime Shine (72804-41) oven cleaner.
Always follow the cleaner manufacturer's instructions when using
any cleaner.
Care should be taken to prevent caustic cleaning compounds
from coming in contact with the aluminized blower wheel and
aluminized inside of the oven.
Discoloration or heat tint may be removed using a carbon release
oven cleaner.
Always apply these cleaners when the oven is cold and rub in the
direction of the metal's grain.
WEEKLY CLEANING
Any foreign material such as corn meal, flour, crust, and topping
should be vacuumed from beneath the crumb catchers weekly.
CLEANING THE DECK
The deck may be cleaned during usage with a brush and scraper.
Periodically, the decks should be turned over. This produces a
pyroletic or self-cleaning action to the underside of the deck. Thusly,
any spillage will be burnt off and upon returning, your deck will be
clean.
Remove the deck by using two flat bladed screwdrivers to "walk up"
the front edge of the right deck. When deck is high enough, grasp it
firmly and pull over the top of other deck. Remove from the front of
the oven.
UL File E8138
MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES, MUCOUS
MEMBRANES AND CLOTHING. PRECAUTIONS SHOULD BE TAKEN
TO WEAR RUBBER GLOVES, GOGGLES OR FACE SHIELD AND
PROTECTIVE CLOTHING. CAREFULLY READ THE WARNING AND
FOLLOW THE DIRECTIONS ON THE LABEL OF THE CLEANER TO BE
USED.
MAINTENANCE & CLEANING
14

Advertisement

Table of Contents
loading

Table of Contents