Optika OPTIGEM Operation Manual page 15

9.0 appendIx 1 – UsIng the optIonal accessorIes
Screw one spacer on the rod, from the top. Repeat the same steps for the other rod:
Switch on the LED ring illuminator. If you want it is possible to put your gem directly on the diaphragm,
after closing it to a proper diameter:
Or, you can use the side clip to hold your object. In order to use the clip, first screw the black plastic
adaptor into the microscope stage (there is a threaded hole on both sides of the stage):
Page 15