Battery Charge - Panasonic KX-TG5671C Operating Instructions Manual

TG5671C(e).book Page 10 Tuesday, February 14, 2006 9:59 AM
Preparation
Battery installation/replacement
1
Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
L If necessary, remove the old battery.
2
Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover.
B
A
Important:
L Use only the rechargeable Panasonic
battery noted on page 5.
10
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to
recycle this battery.

Battery charge

Place the handset on the base unit for 7
hours before initial use.
While charging, "Charging" is displayed
and the CHARGE indicator on the base
unit lights. When the battery is fully
charged, "Charge completed" is
displayed.
OR
Note:
L If you want to use the unit immediately,
charge the battery for at least 15
minutes.