Battery Charge
Place the handset on the base unit and charge for about 6 hours before
initial use.
•The IN USE/CHARGE indicator lights and a beep sounds.
IN USE/CHARGE Indicator
Battery strength
You can check the battery strength on the handset display while the
handset is on the base unit, while it is in use (making/answering a call
etc.), or after viewing the Caller List or directory items, programming etc.
The battery strength will remain for a few seconds after using the
handset, then the display will return to the standby mode (p. 14).
The battery strength is as shown in the chart below.
Display prompt
Battery strength
Fully charged
Medium
Low
(flashing)
Needs to be recharged.
For assistance, please call: 1-800-211PANA(7262)
13