Setting The Unit Before Use - Panasonic KX-TG5671C Operating Instructions Manual

TG5671C(e).book Page 15 Tuesday, February 14, 2006 9:59 AM
Setting the unit before
use
Display language
You can select either "English" or
"Français" as the display language.
The default setting is "English".
1
{MENU} i {0}{8}{1}
2
Select the desired setting.
3
Press the right soft key to save. i
{OFF}
Voice guidance language
You can select either "English" or
"Français" as the voice guidance
language.
The default setting is "English".
1
{MENU} i {0}{8}{2}
2
Select the desired setting. i {Save}
i {OFF}
Dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service. The default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary pulse dial service.
1
{MENU} i {0}{5}{1}
2
Select the desired setting. i {Save}
i {OFF}
Date and time
Set the correct date and time. When you
play back a message from the answering
system (page 34), the unit announces the
day and time it was recorded.
1
{MENU} i {4}
2
Enter the current month, day, and year
by selecting 2 digits for each.
Example: August 15, 2006
{0}{8} {1}{5} {0}{6}
3
Enter the current hour and minute (12-
hour clock format) by selecting 2 digits
for each.
Example: 9:30
{0}{9} {3}{0}
4
Press {AM/PM} to select "AM" or "PM".
i {Save} i {OFF}
Note:
L When English is selected as the display
language, the 12-hour clock format is
used. When French is selected, the 24-
hour clock format is used.
L If you make a mistake when entering the
date and time, press {<}, {>}, {^}, or
{V} to move the cursor, then make the
correction.
Preparation
15