Table of Contents
Advertisement
Activating/deactivating the handset
a
Press and hold the
key to activate or deactivate the handset. If you place a deacti-
vated handset in the base station or charging cradle, it will automatically activate after
approx. 30 seconds.
If you remove the handset from the base station/charging cradle, the display turns off
briefly.
Making calls
Making external calls and ending calls
External calls are calls using the public telephone network.
~
¤ c
(Enter the phone number)
The phone number is dialled. (Or you can first press and hold talk key
and then enter the number.) During the call you can adjust the earpiece volume using
t
u
and set the volume with
End the call/cancel dialling: Press the end call key
You can automatically insert a network provider dialling code before any phone
¢
number (
page 6).
Accepting a call
c
Press the talk key
to accept the call.
When Auto Answer is activated (see menu overview
handset from the base station/charging cradle.
Calling Line Identification
When you get a call, the caller's number will be displayed on your handset; the caller's
name will be displayed if it is stored in the directory.
Prerequisites:
1
You have asked your network provider for the caller's number (CLIP) to be dis-
played on your handset screen.
2
The caller has asked the network provider for his/her number to be identified (CLI).
External call appears in the display if you have not requested CLIP, Withheld appears
if the caller has withheld CLI, and Unavailable appears if CLI has not been requested.
.
.
a
.
¢
page 16), simply remove the
5
Handsfree operation
In handsfree mode, you activate the loudspeaker so that you can hear the caller with-
out having to hold the handset to your ear. During a call and when listening to the
answering machine (Gigaset A220A only) you activate or deactivate handsfree mode
by pressing the handsfree key
For instructions on adjusting the handsfree mode volume see menu overview
¢
page 16.
Call waiting
Many Telecommunication providers in Australia and New Zealand offer a Call waiting
service on your Home Phone Line. Please speak to your service provider to check if
your Home Phone line is activated for this service (charges may apply).
The most common providers instructions for Call waiting are as follows.
c
[dial tone]
Please note
These processes depend on the network provider and are subject to change.
Australia:
Telstra:
To answer an incoming call when you're already on a call, or to switch between calls:
◆
Press the Recall key
To hang up on one call and return to the other:
◆
Press the Recall key
To reject an incoming call when you are already on a call:
◆
Push the Recall key
again.
For more information please contact Telstra.
d
.
P
and listen for the dial tone, then press
P
on your phone and listen for the dial tone, then press
P
on your phone and listen for the dial tone, then press
2
.
1
.
Q
Hide quick links:
Advertisement
Table of Contents
