The Camera - FujiFilm WP-FZX100 Owner's Manual

Positioning the Digital Camera in the Waterproof Case
3
Open the waterproof case (p.8) and set the camera in it.
4
Insert the silica gel pack into the space underneath the bottom of

the camera.

Silica gel pack
5
Confirm the following before closing the waterproof case.
Silica gel pack
6
When all is well, close the waterproof case (p.10).
→
Check that the camera's "POWER" button/w Playback button can be
correctly operated using the controls on the housing.
Slip the camera into the waterproof
case until it stops securely.
• No part of the silica gel pack is
• There is no dust, hair, or other
• The camera is correctly seated and
O-ring
EN-12
When setting the camera into the
waterproof case, make sure to
check that the lens cover is opened
correctly.When closing the lens
cover, it may cause a water leak.
Also it is impossible to take a picture
under water.
When opening the waterproof case,
take care not to catch your fingers or
palm in the waterproof case.
Make sure to insert the silica gel
pack correctly. If it is incompletely
inserted, it will prevent the O-ring
from acting as a seal, and water will
leak in.
protruding.
foreign particle on the O-ring, in
the O-ring groove, or on the edge
face of the waterproof case that
engages with the O-ring.
aligned in the waterproof case.