Setting Up One-Touch Keys - Panasonic DBS 576 User Manual

Section 750 key telephone

Hide thumbs Also See for DBS 576:

Table of Contents

Enlarged version

If . . .

**If you assign an extension number to an FF key, the FF key will light red when the

extension is busy. It will light green when Do-Not-Disturb (DND) or Call Forwarding is

set. In addition, you can pick up a call that is ringing or on hold at the extension by simply

pressing the FF key when it is flashing.

5. Press the HOLD key.

6. Repeat steps 2-5 to program additional keys.

7. Replace the handset or press the ON/OFF key.

To clear an FF-Key's programming

1. Pick up the handset or press the ON/OFF key.

2. Press the PROG key.

3. Press the desired FF key.

4. Press the HOLD key.

5. Replace the handset or press the ON/OFF key.

To check the FF key's setup

Note: This task requires a display phone. For non-display phones, see Appendix B

"Customized PSD Bin Numbers" for a list of your personalized PSD numbers.

1. Pick up the handset or press the ON/OFF key.

2. Press the CONF key.

3. Press the FF key. The assigned function appears on the display.

4. Replace the handset or press the ON/OFF key.

SETTING UP ONE-TOUCH KEYS

You can set up one-touch keys on a non-display or small-display phone to store

phone numbers, speed dial numbers, or feature access codes.

576-25-750

DBS 576 (USA), issued March 1999

2. Setting Up Your Phone

Then . . .

Table of Contents