Panasonic DBS 576 User Manual page 32

2. Setting Up Your Phone
To delete a name assigned to a PSD number
Notes:
• This task requires a display phone.
• You need to know the PSD bin number for the PSD number in order to delete
an assigned name. To check the bin number for a key, see "Checking Speed
Dial Numbers."
1. Pick up the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 0 for the Name Assignment mode.
5. Press the VOLUME key until the desired PSD bin number (80-99) is displayed.
6. Press the FLASH key to clear the current/default data.
7. Press the HOLD key.
Notes:
• It is strongly recommended that you assign the PSD bin number as a name
for the key at this point so that it will appear on the display for future use.
The bin number should be entered in the following format: -PSDxx (or xxx)
where xx or xxx = the actual bin number. Example: -"PSD901". For more
information, see "Assigning and Deleting Names for PSD Numbers."
• If using a large-display phone, press the MENU key, then the key to the left
of PERSONAL DIAL to have the change reflected on the display.
32 DBS 576 (USA), issued January 1999 576-25-750