Panasonic DBS 576 User Manual page 25

Table 4. Corresponding one-touch or soft keys and PSD bin numbers
One-touch or soft key
Small-display and
non-display phones
1
2
3
etc.
To assign a PSD number to a one-touch or soft key
Note: Before assigning PSD numbers, you must determine whether the system is set
up for Intercom Level (programmed to dial an inside line) or MCO Code level
(programmed to dial an outside line). Depending on the system set up, you must
include the appropriate dialing code as part of the PSD number. To determine which
code to use, see Table.
1. Pick up the handset or press the ON/OFF key.
2. Either:
•
Press the PROG key and then press the AUTO key.
•
Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Enter the phone number you want to be speed-dialed from that key (maximum
length = 16 characters). Remember to include the Intercom Level or MCO Code
level code depending on how the system is set up. (Refer to the following table.)
576-25-750 DBS 576 (USA), issued March 1999
2. Setting Up Your Phone
Corresponds to PSD bin on ...
Large-display phone
80 80 or 90
81 81 or 91
82 82 or 92
OR
25