Setting Up One-Touch Keys - Panasonic KEY TELEPHONE User Manual

2. Setting Up Your Phone
If . . .
**If you assign an extension number to an FF key, the FF key will light red when the exten-
sion is busy. It will light green when Do-Not-Disturb (DND)or Call Forwarding is set. In
addition, you can pick up a call that is ringing or on hold at the extension by simply pressing
the FF key when it is flashing.
Press the HOLD key.
5.
Repeat steps 2-5 to program additional keys.
6.
Replace the handset or press the ON/OFF key.
7.
To clear an FF key's programming
Pick up the handset or press the ON/OFF key.
1.
Press the PROG key.
2.
Press the desired FF key.
3.
Press the HOLD key.
4.
Replace the handset or press the ON/OFF key.
5.
To check the FF key's setup
This task requires a display phone.
Note:
Pick up the handset or press the ON/OFF key.
1.
Press the CONF key.
2.
Press the FF key. The assigned function appears on the display.
3.
Replace the handset or press the ON/OFF key.
4.

SETTING UP ONE-TOUCH KEYS

You can set up one-touch keys on a non-display or small-display phone to store
phone numbers, speed dial numbers, or feature access codes.
To program a one-touch key for an outside phone number
Pickup the handset or press the ON/OFF key.
1.
Press the PROG key.
2.
Press the one-touch key to be programmed.
3.
20
Then . . .
Key Telephone User Guide