Panasonic DBS 576 User Manual page 66

6. Using Additional Features
2. If adding an outside party, press a vacant CO key or dial a trunk access code.
3. Dial the number of the party you want to add to the call.
4. Press the CONF key when your call is answered. (You are connected to the
called party.)
5. To add another party, repeat steps 1-4.
6. For 3-party Conference Call Only:
To release a conference member, press PROG + 1 to release conference
member 1 or press PROG + 2 to release conference member 2, etc.
Note: The conference member numbers are shown on the display.
7. To drop out of the conference call, hang up.
To establish a 2-party private conversation from a 3-party
conference (Version 2.5 or higher)
1. While on a call, press CONF + 1 (2) to have a private conversation with the
CNF 1 (2) party as shown on the display.
2. To reestablish the conference, press CONF.
To remove a busy tone (hang up) from an 8-party conference
(Version 2.5 or higher)
1. During a conference with more then 3 parties, press CONF + (n) (where n is the
number 1-8 for the conference parties) to individually select a conference party.
2. If you did not select the conference party that is giving busy tone, re-enter the
conference by pressing CONF.
3. If you selected the conference party that is giving busy tone, hang up and then
go off-hook again and press CONF to re-enter the conference call.
66 DBS 576 (USA), issued January 1999 576-25-750