Manufacturer's Warranty - Tools; Ec Declaration Of Conformity (Original) - Hilti SF 8H-A22 Operating Instructions Manual

For EC countries only
Disposal of electric tools together with household
waste is not permissible.
In observance of the European Directive on waste
electrical and electronic equipment and its imple-
mentation in accordance with national law, electrical
appliances that have reached the end of their life must
be collected separately and returned to an environ-
mentally compatible recycling facility.

11 Manufacturer's warranty - tools

Hilti warrants that the tool supplied is free of defects in material
and workmanship. This warranty is valid so long as the tool is
operated and handled correctly, cleaned and serviced properly
and in accordance with the Hilti Operating Instructions, and the
technical system is maintained. This means that only original Hilti
consumables, components and spare parts may be used in the
tool.
This warranty provides the free-of-charge repair or replacement
of defective parts only over the entire lifespan of the tool. Parts
requiring repair or replacement as a result of normal wear and tear
are not covered by this warranty.
Additional claims are excluded, unless stringent national rules
prohibit such exclusion. In particular, Hilti is not obligated for
direct, indirect, incidental or consequential damages, losses
or expenses in connection with, or by reason of, the use of,
or inability to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose are
specifically excluded.
For repair or replacement, send the tool or related parts immedi-
ately upon discovery of the defect to the address of the local Hilti
marketing organization provided.
This constitutes Hilti's entire obligation with regard to warranty
and supersedes all prior or contemporaneous comments and oral
or written agreements concerning warranties.

12 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product complies
with the following directives and standards:
2004/108/EC,
EN 60745­2­1, EN 60745­2­2, EN ISO 12100.
Hilti Corporation, Feldkircherstrasse 100, FL­9494 Schaan
Paolo Luccini
Head of BA Quality and Process Manage-
ment
Business Area Electric Tools & Accessories
10/2013
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
Printed: 14.11.2013 | Doc-Nr: PUB / 5161651 / 000 / 00
2006/66/EC,
Cordless drill / driver
SF 8-A22 / SF 8H-A22 / SF
10W-A22 / SF 10M-A22
2011/65/EU,
Executive Vice President
Business Unit Power Tools & Accessories
01
2012
2006/42/EC,
EN 60745­1,
Jan Doongaji
10/2013
31
en