Set The Network - MIMAKI CG-60SRIII Operation Manual

Set the network

You can also perform network setting with "Network Configurator", the tool to perform network setting of
Mimaki's product. To download the Network Configurator, check " Driver / Utility" on the download page at
Mimaki Engineering (http://eng.mimaki.co.jp/download/).
1
Press the
FUNCTION
2
Press the jog key
3
Press the
ENTER/HOLD
4
Press the jog key
5
Press the
ENTER/HOLD
6
Press the
ENTER/HOLD
• The IP address currently used by this machine is displayed.
• After connecting with the network, it takes time until the IP address is determined.
If the IP address has not been determined, "0.0.0.0" is displayed.
7
Press the
ENTER/HOLD
8
Press the jog key
Address] .
9
Press the
ENTER/HOLD
• The MAC address currently used by this machine is displayed.
• When you press
10
Press the
ENTER/HOLD
key in the local mode.
or to select [SET UP] .
key.
or to select [NETWORK].
key.
key.
key.
or to select [MAC
key.
, the remaining address is displayed.
key.
Other Useful Functions
3-61
1
1
3
5
6