Select The Number Of Pinch Roller To Use - MIMAKI CG-60SRIII Operation Manual

Select the number of pinch roller to use

Set the number f pinch roller to detect when the sheet detection.
For the machine with more than three pinch rollers, it is displayed.
1
Press the
2
Press the jog key
3
Press the
4
Press the jog key
ROLL] .
•
5
Press the
6
Press the jog key
of pinch roller to detect.
• PINCH ROLL: 2 or 3
7
Press the
8
Press the jog key
"ROLL. SELECT".
• When selecting the number of pinch roller at sheet detection, select
"ON".
9
Press the
• If "2" is set to "PINCH ROLL" and "OFF" is set to "ROLL. SELECT", only 2 pinch rollers will be
detected at sheet detection.
• When using wider sheet, you may wish to limit the number of pinch roller because you do not want to
leave the trace of the roller on the sheet. In such a case, as there is the possibility that the sheet
driving accuracy will become lower, make the cutting speed and up speed low enough or set "HEAVY"
to [SHEET TYPE] to limit the driving speed. By doing this, you can gain better cutting result.
3-56
key in the local mode.
FUNCTION
or
key.
ENTER/HOLD
or
key.
ENTER/HOLD
or
key.
ENTER/HOLD
or to select the setting of
key twice for terminating this function.
END
to select [SET UP] .
to select [PINCH
to select the number