Related Manuals for MIMAKI CG-FXII Series
Summary of Contents for MIMAKI CG-FXII Series
- Page 1 For CG-FX/FXII(Plus) series users Support document of cutting with register marks (ERROR 36 MARK DETECT) September 2023 Mimaki Engineering Co., Ltd. Ver:1.00 WTQA2011-0676...
-
Page 2: Table Of Contents
< Table of contents > 1. Register mark detection after sheet detection ............1 2. Register marks creating condition ................3 3. Register mark setting ....................5 4. Plotting from FineCut ....................6 5. Errors related to registration marks beyond the second point and others....7 WTQA2011-0676... - Page 3 How to take actions when “ERROR 36 MARK DETECT” occurred When did “ERROR C36 MARK DETECT” occur? Please follow the operation instructions for the cutting with register marks. For detailed operations, please refer to the “CG-FX/FXII series instruction manual” and “FineCut reference guide”. Set the printed sheet with registration marks on the plotter and detect the sheet.
-
Page 4: Register Mark Detection After Sheet Detection
1. Register mark detection after sheet detection point (1) Are the register marks created with FineCut? Register marks created with Illustrator cannot be read. Only register marks created with FineCut can be detected. point (2) Is the sheet white and the black register marks? Colored sheets and colored register marks cannot be detected. - Page 5 Push the clamp lever forward and lift the pinch roller. When you do this, point the light pointer will illuminate, allowing you to manually move the (5) Is the sheet tilted? carriage left and right. Move the carriage by hand between TP1 and TP3, aligning it within the sheet’s line using the light pointer’s line to When the sheet is released, the adjust the sheet’s alignment.
-
Page 6: Register Marks Creating Condition
2. Register marks creating condition When the register mark is Type 1 (outward-facing register mark) point (1) Is there any object obstructing the area around the register marks? If there are objects in unprintable area, errors may occur in case of Unprintable area sheet misalignment or other issues. - Page 7 point The area around the register marks (from the corners of the register marks (7) Is there any data or dirt in the to an area equal to the length of the register marks) is an unprintable area. unprintable area? Ensure that no data is printed in this area and it remains free from dirt.
-
Page 8: Register Mark Setting
3. Register mark setting Execute the menu. CT1 20 040 0.30 [MARK DETECT] FUNCTION Press the up/down key to change the setting, press the [ENTER] key to confirm the settings or proceed to the next menu. ENTER SET UP <ENT> MARK DETECT <ENT>... -
Page 9: Plotting From Finecut
4. Plotting from FineCut Please follow the operation instructions. 1. Launch FineCut and click on the [Register Mark] tab in the plot screen. * Rotate the sheet beforehand to ensure it is in the same orientation, and then click on the [Register Mark] tab. 2. -
Page 10: Errors Related To Registration Marks Beyond The Second Point And Others
5. Errors related to registration marks beyond the second point and others. Measure the distance between registration marks on the printed material point and compare it to the registration mark distance in the data. Adjustments are made even if there is a discrepancy in the registration (1) If an error occurs during the mark distance between the printed material and the data due to factors detection... - Page 11 This document was created based on calls received from users. If you cannot solve the problem even after checking the contents of the document, or if you have any questions, please contact your local dealer for assistance. - End of document - - 8 - WTQA2011-0676...
Need help?
Do you have a question about the CG-FXII Series and is the answer not in the manual?
Questions and answers