Table of Contents
Advertisement
Remove the jumper from pins 1 and 2 to clear your password.
4.
Place the jumper back on pins 1 and 2.
5.
Replace the access panel, plug in the AC power adapter, and power
6.
up the system.
7.
At the startup screen, press
Navigate to the Security Menu and set your new password (see
Chapter 3, "Configuring the System" for details on setting a
password).
Intel Processor Serial Number Control
Utility
The Intel Processor Serial Number Control utility is a Windows program
that enables or disables the reading of the Pentium III processor serial
number by software. This function lets you control which software
programs or websites have permission to read the processor serial
number. When installed, the utility runs automatically each time the
system powers on.
This utility places an icon in the Windows system tray. The icon provides
a visual status of the processor serial number. You have the option of
hiding the system tray icon. You can disable the processor serial number
at any time. However, enabling the serial number requires restarting the
system.
The following information describes:
T system requirements
T installation procedures
T processor serial number features
T FAQs
T errata
T technical support.
3-34 Configuring the System
F2
to open the BIOS Setup utility.
Advertisement
Table of Contents
